4U rack-mount chassis for video to fiber converter cards dual power
Product Overview
The 4U Chassis can accommodate a combination of up to 18pieces 2-4
channels video modules or 9 pieces 5-8 channels video modules . The
chassis employs a 110/220 VAC Switch Mode Power Supply(SMPS)
design, which reduces the possibility of a single module failure
causing a shutdown or a major failure of other modules within the
chassis. The high reliability and stability ensures that if one
module shuts down, the operation of the other modules remains
unimpaired. 0ne or two air-cooling fans are installed inside to
further strengthen the superior performance of the system and
eliminate the necessity for periodic maintenance. Status
information can be read through the LED indicators on the installed
modules. All of the modules installed in the chassis are
hotswappable, which makes it unnecessary to power-down the chassis
when replacing modules.
A picture of 4U 19’’ 4U Chassis as follow:
Do not use until you ready this manual carefully .Please follow the
installation given by this manual when using .
Installation
1. When you unpack this product package ,please check the devices
with packing list .
2. Install the 18-slots chassis into a standard 19” cabinet and fix
it .
3. Insert the video converter module to the guide rails of the slot
.Make sure the power plug of video converter module is inserted in
power port of the chassis .When the converter module is fully and
firmly fit the chassis ,fasten the screws .Follow the above steps
,install all necessary converter modules in the chassis ,then block
up any slots not for use temporarily .
4. If the chassis is with dual power supply ,please turn on both
two power supply ,and they will work together. This will extends
the life cycle of the power supply, and can make sure the chassis
work normally in case one of them broken down.
Specifications
Available Module Slots : 18
Video converters module adapted: 1-8 video or 1-8 video+options
Power in : AC 100 V~260 V
Power out : DC5V 20A
Dimensions:L482.6 *W313.5*H177 mm ;19 inch 4U
Shipping Weight: 6.2Kg
Environmental
Construction: Aluminum
MTBF: > 100,000 hours
Operating Temp: -30° C to +50° C
Storage Temp: -40° C to +85° C
Relative Humidity: 0% to 95% (non condensing)
Packing list
4U 1PC 19’’ 4U chassis
Power line 1 PC (For single power supply option)
2 PCs (For dual power supply option)
User’s manual 1 pc
